Silvercrest SWEP 500 A1 - Manual (Page 28)

Fine tuning
If a station can not be found precisely the fine tuning can be use to improve
reception.
•
During the channel search press the FINE button, the screen shows FINE.
• Now, using the buttons UP resp. DOWN , adjust the required reception
range with smaller frequency steps.
• By pressing the FINE again you leave the fine tuning function again.
This function is not available for the LW frequency range.
Aerial
The rotatable telescopic aerial on the radio can be used for the FM and
SW bands.
•
Pull the aerial out fully and arrange it for optimum reception.
The SW SEN. switch on the left side of the device can be used to improve the
reception quality for the SW band. Select LX for strong stations and DX to
improve reception for weak stations.
The telescopic aerial does not work in the MW and LW bands. In these
ranges, reception is made by means of the built-in ferrite aerial.
•
Align the radio for best reception.
Region Channel
spacing
Band range
Amerika 10 kHz 520-1710 kHz
Europa 9 kHz 522-1656 kHz
- 26 -
IB_71305_SWEP500A1_LB4 20.12.2011 9:54 Uhr Seite 26