Silvercrest Nose & Ear Hair Trimmer - Manual (Page 49)

49 GB/MT
Cleaning, care and storage
j Put the nasal and ear hair trimmer attachment 2 back onto the
trimmer 4 again and put the protective head guard 1 on.
Q
Cleaning and opening
the beard trimmer attachment
6
j Remove the attachment and clean it with the accompanying
cleaning brush.
j The beard trimmer attachment 6 must not be cleaned with water
or other liquids.
j Using your thumb, press against the edge of the beard trimmer
attachment
6 from the bottom and then pull the top part with the
cutting unit off (see Fig. C).
j Use the accompanying cleaning brush to carefully clean the cutting
unit.
j First insert the upper part of the beard trimmer attachment 6 at
the front and then let it click into place at the back (see Fig. C).
Q
Caring for the beard trimmer attachment
6
j Occasionally place one or two drops of oil onto the cutting unit
of the beard trimmer attachment
6 and distribute the oil evenly.
j Only use acid-free oil such as sewing machine oil.
j Wipe any excess oil off with a cloth.