Silvercrest Nose & Ear Hair Trimmer - Manual (Page 47)

47 GB/MT
How to use
Trimming the hairs in your nose
j Carefully insert the nasal and ear hair trimmer attachment 2 into
the front area of your nostril. Remove the nasal hair with small
circular movements.
j After using the trimmer 4 , push the ON / OFF switch 3 down-
wards.
j Clean the appliance (see section on “Cleaning, care and storage”).
Q
Using the appliance with
the beard trimmer attachment
6
j The beard trimmer attachment 6 is particularly suitable for hard-
to-reach places and for trimming or shaping (smaller) beards.
j After exchanging the attachments (see section on “Changing the
attachments”), you can use the appliance to cut contours and trim
your beard.
j Switch the trimmer 4 on by pushing the ON / OFF switch 3
upwards.
j Carefully run the beard trimmer attachment 6 along the skin from
the top to the bottom, holding it at a shallow angle and without
exerting any pressure.
Note: To avoid cutting yourself, do not cut from the bottom
upwards and do not run the appliance sideways along the skin.
j After using the trimmer 4 , push the ON / OFF switch 3 down-
wards.
j Clean the appliance (see section on “Cleaning, care and storage”).