Silvercrest SSM 175 B2 - Manual (Page 36)

34 GB
Instructions for safe operation
~ This device must not be used by children.
~ Children should not be allowed to play with the device.
~ The device and the power cable must be kept away from children.
~ This device can be used by people with restricted physical, sensory
or intellectual abilities or people without adequate experience
and/or understanding if they are supervised or instructed on how
to use this device safely and if they are aware of the resulting risks.
~ If the power cable of this device should become damaged, it must
be replaced by the manufacturer, the manufacturer's customer ser-
vice department or a similarly qualified specialist, in order to avoid
any hazards.
~ Disconnect the mains plug from the wall socket …
… when it is not supervised,
… before you assemble or disassemble the device, and
… before you clean the device.
~ Clean the blade assembly and the blender jugs with warm water
and a little detergent.
DANGER for children
~ Packing materials are not children's
toys. Children should not be allowed to
play with the plastic bags. There is a
risk of suffocation.
~ Please ensure that children are not able
to pull the device down from the work
surface with the power cable.
~ Keep the device out of the reach of chil-
dren.
DANGER! Risk of electric
shock due to moisture
~ The device must never be operated in
the vicinity of a bathtub, a shower, a
filled hand basin or similar.
~ The motor unit, the housing, the power
cable and the mains plug must not be
immersed in water or other liquids.
~ Protect the motor unit and housing from
dampness and dripping or splashing
water.
~ If liquid gets into the motor unit or hous-
ing, remove the mains plug immediate-
ly. Have the device checked before
reusing.
~ Never touch the device with wet hands.
~ If the device falls into water, disconnect
the mains plug immediately. Only then
is it safe to retrieve the device.
DANGER! Risk of electric
shock
~ Only plug the mains plug into the wall
socket after the device has been com-
pletely assembled.
~ Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must continue to be eas-
ily accessible after the device is
plugged in.
__RP103371_B2.book Seite 34 Freitag, 21. November 2014 1:02 13