Eurotech Appliances WL1000 - Manual (Page 45)

WL1000 User Manual 45
Starting a WAN connection
These steps will tell you how to create a new WAN connection on your WL1000:
1. Insure that the WLAN feature in the Communication Tab of the Zypad setup is enabled: see
the “
Zetup (Zypad Setup) ” paragraph. The corresponding LED will turn ON
2. Tap Start > Settings > Network and Dial-up Connections
3. Double tap the Make New Connection icon
4. In the Make New Connection dialog box, enter a name for the connection
5. Select the connection type: Dial-up or Direct
•
If you selected the “Dial-up Connection”:
The procedure to follow is the same describe in the paragraph “
How to Configure Bluetooth for
acceding to WWAN networks ”. The connection you have just created appears as an icon in the
“Network and Dial-up Connections” folder.
•
If you selected the “Direct Connection”:
The selectable device is “Serial USB” only. The Device dialog box allows you to configure the
Serial USB properties and set the TCP/IP and security settings