Eurotech Appliances WL1000 - Manual (Page 40)

40 WL1000 User Manual
8. Flag the Active option. A red flag will appear on the device icon
9. Tap OK
HOW TO REMOVE A BLUETOOTH DEVICE
1. Tap Start > Settings > Control Panel > Double tap on Bluetooth Device Properties
2. In the Trusted list double tab on the device you want to remove
3. Tap Delete
HOW TO CONFIGURE BLUETOOTH FOR ACCEDING TO WWAN NETWORKS
With your Zypad WL1000, it is possible to access a WWAN network by using an external Bluetooth
wireless modem.
Note:
Means device not connected to a network
Means device connected to a network
X
The following steps will give you an example about how to configure the WL1000 Bluetooth feature for
using an external GPRS device.
In the example, the GPRS device used is called: P342i.
1. Insure that the Bluetooth Communication feature in the Communication Tab of the Zypad
setup is enabled: see the “
Zetup (Zypad Setup) ” paragraph. The corresponding LED will turn
ON.
2. Tap Start > Settings > Network and Dial-up Connections
3. Double tap on Make New Connection
4. Type a name for the connection
5. Tap Next