Silvercrest SNMD 33 A1 - Manual (Page 89)

1
h
1 2
Stitch Stitch width Stitch length
I 3~5 0.3~0.5
GB / IE 89
Please note:
Set the stitch width before starting to
sew. Carefully turn the hand wheel (21)
to check that the twin needle enters the
stitch hole without touching or even
striking the stitch plate (10) or pressure
foot.
When sewing with a twin needle (j)
always advance and sew slowly to
ensure quality stitching.
When sewing with a twin needle both
threads must be of the same weight.
You can use one or two colours.
1. Place one felt cushion (h) and one
spool (m) on the left spool pin (15) as
usual.
2. Place another felt cushion (h) and
another spool (m) on the right thread
spool pin (15).
3. Insert the twin needle (j).
4. Thread both threads as usual.
5. As the last step, thread one thread
through the left needle and the other
through the right needle.
Stitch Stitch width Stitch length
A 2.5 1~4
Scallop stitching
You can produce a decorative edge with
the scallop stitch
1. Sew the scallop stitch along the edge
of the material.
2. If desired, trim around the scallop with
scissors to create a scalloped edge.
Be careful not to cut the thread.
Sewing basics
Twin needle