Silvercrest SNMD 33 A1 - Manual (Page 79)

h
1
2 3
4 5
A
B
Important:
Set the main switch (20) to ("O").
Raise the presser foot bar by lifting the
two-step presser foot lifter (18) and lift
the thread lever (1) by turning the
hand wheel (21) anti-clockwise. Follow
the arrows and numbers on the
sewing machine when threading.
1. Place cushion (h)
thread spool pin (15)
of thread
thread
2. Guide the upper thread through the
upper thread guide (16) from right to
left, then move it forward into the right
slot and guide it downwards.
3. Guide it to the left under the guide lug
(A) and then upwards again.
4. Guide the thread from right to left
through the thread lever (1) and then
downwards.
5. Guide the thread first behind the large,
metal thread guide (B) and then
through the eye of the needle. Always
thread the needle from the front.
the felt on the left
. Place the spool
(m) on the same spool
pin (15).
GB / IE 79
Threading the upper thread
Getting ready
Needle threader
You can use the needle threader (f) as a
threading aid.
1. Insert the needle threader (f) through
the eye of the needle from back to
front.
2. Guide the upper thread through the
wire loop of the needle threader.
3. Pull the needle threader (f) together
with the thread back through the eye of
the needle. 1 2 3