Silvercrest TWINTALKER 4810 User Manual

Page 13

Twintalker 4810

ENGLISH

13.7.2 DCS

13.8 Monitor

You can use the monitor feature to check for weaker signals in the current channel.

•

Press the

-button

and

-button

simultaneously to activate channel

monitoring.

•

Press the

-button

to stop channel monitoring.

13.9 VOX Selection

The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended if you plan to use your radio in a noisy or windy environment.

•

Press the

-button

three times : "DCS" and the

current DCS code flashes on the display.

•

Press the

-button

or the

-button

to change to

another code.

•

Press the PTT-button

to confirm and return to stand-by

mode.

•

Press the

- button

four times, the current VOX

setting flashes on the display and the VOX icon is
displayed.

•

Press the

-button

to set the VOX sensitivity level

between 1 and 3 (level 3 is the most sensitive level).

•

Press the

button

until ‘OF’ appears on the display,

to turn VOX OFF.

•

Press the PTT - button

to confirm and return to stand-by

mode.

To disable CTCSS or DCS, select code "00" for CTCSS or for DCS in the
menu. When the entry is confirmed, "OF" will be displayed.

During channel monitoring the receiver circuit in the PMR will not listen to
CTCSS or DCS codes.

VOX mode will be overrided when you press the PTT - button