Silvercrest LCD-TV 32111 - Manual (Page 12)

English - 10 -
To select the “Yes” or “No” option, highlight the item by
using “ ” or “ ” buttons and press OK button.
Afterwards, the following OSD will be displayed on the
screen and the digital television will search for digital
terrestrial TV broadcasts
NOTE: You can press MENU button to cancel.
After all the available stations are stored, Channel •
List will be displayed on the screen. If LCN is
available in your country, a message appears on
the screen which asks you if you want to sort the
channels according to LCN.
In some countries, the order of the channels is •
arranged automatically by the broadcaster. This is
called logical channel number (LCN). If the selected
country has LCN support, the channels will be
enumerated one by one, beginning from number
1. You cannot move any programme to a position
after the last saved one. If you try to do this, both
programmes will change their places. If LCN support
is not available, you can move the channels as
you wish.
Press • OK button to quit channel list and watch TV.
Input Selection
Once you have connected external systems to
your TV, you can switch to different input sources.
Press “SOURCE” button on your remote control
consecutively for directly changing sources.
Menu Operations
You can move in the menu screen using the cursor
buttons. Use Up or Down button to select a line and
press Left or Right button to set a menu item.
To exit a menu screen, press M button. Changes are
stored automatically.
Viewing Electronic Programme
Guide (EPG)
Some, but not all, channels send information about the
current and next events. Press EPG button to view the
EPG menu. EPG appears on the screen. It is able to
get Information of the channel - programmes weekly
by means of 7-DAY-EPG. All channels are listed with
their programmes. At the bottom of the screen, info
bar displays all available commands.
Press “ • ”/“ ” buttons to navigate through channels.
Press “ • ”/“ ” buttons to navigate through the
programme list.
EPG menu displays available information on all •
channels.
Please note that event information is updated •
automatically. If there are no event information
data available for channels, EPG is displaying No
Information.
OK (Options): Displays programme options
including “Select Channel” and “Set Timer for
Programme”.
Select channel: • allows you to jump directly to the
selected channel.
Set timers for programme: • With this option, the
device automatically switches to the programmed
programme.
INFO (Event Details): Displays the programmes in
detail. If available, this option views the details of the
selected channel.
56966-LCD-TV-32111-DVB_T-GB-1241110_10071112_50179828.indd 10 24.11.2010 14:59:23