EVGA 141-BL-E757 - Manual (Page 23)

23
 USB 2.0
 Expansion slots
 CMOS Clear Button
24-pin ATX Power (PW1)
PW1 is the main power supply connector located along the edge of the board
next to the DIMM slots. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
Figure 3. PW1 Motherboard Connector
Table 1. PW1 Pin Assignments
Connector Pi
n
Signal Pi
n
Sign
al
1 +3.3V 13 +3.3V
2 +3.3V 14 -12V
3 GND 15 GND
4 +5V 16 PS_O
N
5 GND 17 GND
6 +5V 18 GND
7 GND 19 GND
8 PWROK 20 RSVD
9 +5V_A
UX
21 +5V
10 +12V 22 +5V
11 +12V 23 +5V
12 +3.3V 24 GND
PW1 connector
Plug power cable from system
power supply to PW1
1 12
13 24