Safety instructions – Livarno Z31159A-BS Z31159B-BS User Manual
Page 7

7
GB
2 Dowels (for countersunk head screws)
(ø 5 mm)
2 Short round-head screws
(for wood) (ø 3 x 14 mm)
2 Long countersunk head screws
(for masonry) (ø 3.5 x 28 mm)
2 Caps
1 Instructions for use
Safety instructions
DANGER TO LIFE!
Keep children away from the work area
during assembly. A large number of screws
and other small parts are included in
delivery. They could pose a danger to
life if they are swallowed or inhaled.
Children or persons who lack knowledge
or experience in handling the device or
who have limited physical, sensory or
mental abilities may not use the device
without supervision or without instruction
by a person responsible for their safety.
Children should be supervised at all times
to ensure they do not play with the device.
Use the light only with installed
glass lamp cover
11
in front
of the bulb.
CAUTION! RISK OF
INJURY! Broken glass lamp
cover
11
must be replaced
before any further use is made of the
lamp.
This lamp is suitable only for
use indoors.
Danger to life by
electric shock
After unpacking the lamp, immediately
check the glass lamp covers
11
as well
as the mains lead
5
and, if need be,
the connection cable
14
for damage.
Do not install the lamp if you discover
any damage.
If the external flexible cable of this lamp
is damaged, it may only be replaced by
a special cable or a cable that is only
available from the manufacturer or his
service representative.
Before assembly, ensure that the mains
voltage available corresponds to the
operating voltage necessary of the light
(230 Volt ∼).
Never let the lamp come into contact
with water or other liquids.