Livarno Z31159A-BS Z31159B-BS - Manual (Page 11)

11 GB
Replacing a bulb
RISK OF ELECTRIC
SHOCK! To replace the bulb 13 , first
of all disconnect the light from the mains
circuit. Pull the mains plug of the mains
lead
5 out of the mains socket.
CAUTION! RISK OF BURNS! Let the
bulbs cool down fully before replacing
them.
Never touch the halogen lamp with bare
hands. Otherwise this may result in dam-
age to the bulb. If you find you have
touched a bulb with your bare hands,
wipe the halogen bulb clean using alco-
hol and a fluff-free cloth.
Turn the cover 11 anticlockwise and take
it off.
Draw the defective bulb 13 out of the
fitting socket in the direction of the arrow
(see Fig. C).
Note: Use only a halogen bulb type G4
12 volt with a maximum rated power of
20 W.
Note: Use a soft, fluff-free cloth when
you are replacing a bulb. Never touch
the bulb with your bare hands.
Insert a new bulb into the fitting socket.
Put the cover back in place and turn it
clockwise to tighten it.
Maintenance and Cleaning
CAUTION! DANGER OF ELECTRIC
SHOCK! Pull the mains plug of the
power supply cable
5 out of the
socket.
DANGER TO LIFE BY
ELECTRIC SHOCK! For electrical
safety the light must never be cleaned
with water or other liquids, or immersed
in water.
Do not use solvents, petrol etc.
Use a dry fluff-free cloth when you are
cleaning.
Disposal
The packaging consists of envi-
ronmentally-friendly materials that
you can dispose of at the local
recycling collection points.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.