Introduction, Proper use, Description of parts – Livarno 6401–186L User Manual
Page 6: Technical data, Scope of delivery, Safety, Safety notes, Introduction / safety, Energy-saving ceiling light introduction
6 GB
Introduction / Safety
Energy-Saving Ceiling Light
Introduction
We congratulate you on the purchase
of your new device. You have chosen
a high quality product. Please read
carefully and completely through these operating
instructions. Fold out the page with the illustrations.
These instructions are part of the product and
contain important information about bringing the
product into use and its handling. Always observe
all the safety advice. Check that the correct mains
voltage is available and that all the parts have been
properly assembled before bringing into use. Should
you have any questions or be uncertain as to how
to operate the device, please get in touch with your
dealer or service point. Please keep these instructions
in a safe place and hand them on to a third party if
necessary.
Proper use
This light is suitable only for interior use, in dry and
enclosed spaces. The lamp can be attached to all
normally flammable surfaces. This device is intended
for use only in a domestic, private household environ-
ment.
Description of parts
1
Cover
2
Bulb
3a
End cap
3b
End cap
4
Opening for mains connection cable
5
Mains connection cable (external)
6
Terminal block
7
Mounting opening
Technical data
Article No.:
6401–186L
Dimensions:
approx. 73.5 x 16 x 5.5 cm
(L x W x H)
Operating voltage:
230–240 V ∼, 50 Hz
Bulbs:
220–240 V, 18 W, T8
Max. nominal output: 2 x 18 W
Protection class:
I /
Protection class:
IP20 (only suitable for
indoor use)
Scope of delivery
1 Ceiling light, model 6401–186L
2 Bulbs 18 W, T8
4 Dowels
4 Screws
1 Operating instructions
Safety
Safety notes
Damages due to failure to follow these instructions
for use will void the product warranty! We assume
no liability for secondary failures! We assume no
liability for property or personal damages due to
improper handling or failure to observe safety
instructions!
Avoid danger to life from
electric shock
Ensure that a qualified electrician or a person
trained to carry out electrical installations
performs the electrical installation.
Check the lamp and the mains lead for damage
each time before connecting them. Never use
your lamp if you discover that it is damaged in
any way.