Livarno LAH 55 A1 - Manual (Page 11)

9 LAH 55 A1
GB
TAKE NOTE
Do not touch the bulb with your bare fi ngers, use a lint-free soft cloth. ►
Fig. Changing the bulb
Switch the appliance off with the On/Off switch ♦ 6 + 7 .
Ensure that the mains power adapter resp. car adapter is not plugged into ♦
the charging socket 12 .
Loosen the retaining ring of the spotlight ♦ by turning it slightly clockwise
and then removing it from the appliance.
Remove the cable ♦ and the retaining clip from the bracket .
Remove the bulb from its socket ♦ and carefully loosen the plug connector
of the connecting cable.
Insert a new bulb of the same type (see technical data) into the socket ♦
and reattach the connection cable with the plug connector .
Secure the bulb with the retaining clip ♦ and fasten them as per the cable
with the screw and the nut on the bracket .
Replace the retaining ring of the spotlight ♦ on the appliance so that the
restraints of the ring engage and grip into the recesses of the housing. Lock
the retaining ring by turning it slightly anti-clockwise.