Envision Peripherals EN7600 - Manual (Page 10)

9
FRONT PANEL CONTROL
 Power Button:
Press this button to turn the monitor ON or OFF.
 Power Indicator:
Blue — Power On mode.
Orange — Off mode.
 MENU / ENTER :
Activate OSD menu when OSD is OFF or activate/de-activate adjustment
function when OSD is ON or Exit OSD menu when in Volume Adjust OSD
status.
 Brightness :
Adjust brightness or function adjust.
 Contrast :
Adjust contrast or function adjust.
 Auto Adjust button / Exit:
1. When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2. When OSD menu is in off status, press this button for 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock
and Focus.
OSD Lock Function: To lock the OSD, press and hold the MENU button
while the monitor is off and then press power button to turn the monitor
on. To un-lock the OSD - press and hold the MENU button while the
monitor is off and then press power button to turn the monitor on.
NOTES

Do not install the monitor in a location near heat sources such as
radiators or air ducts, or in a place subject to direct sunlight, or excessive
dust or mechanical vibration or shock.
 Save the original shipping carton and packing materials, as they will
come in handy if you ever have to ship your monitor.
 For maximum protection, repackage your monitor as it was originally
packed at the factory.
 To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a
mild detergent solution. Never use strong solvents such as thinner,
benzene, or abrasive cleaners, since these will damage the cabinet. As a
safety precaution, always unplug the monitor before cleaning it.