beautypg.com

Emerson KF100AP01 User Manual

Page 7

background image

11. Engage the connector of the switch

housing/light fitter assembly with the
motor connector (Figure 8). The two
connectors are color-coded and must
be mated correctly (color-to-color)
before they can be engaged. Make
sure the connectors close properly.

12. Partially install two 8-32 x 7mm pan

head screws (supplied) into two of the
threaded holes in the side of the switch
housing plate (Figure 8).

13. Position the two slots in the switch

housing/light fitter assembly over the
two 8-32 x 7mm screws (Figure 9).
Turn the switch housing assembly
clockwise and tighten the two screws.
Install another 8-32 x 7mm pan head
screw into the remaining hole to
secure the switch housing assembly.

NOTE: Do not pinch wires between the
switch housing assembly and the
switch housing plate.

8. Turn the fan motor and housing assem-

bly upside down in preparation for
mounting the fan blade assemblies.
Remove and discard the three shipping
retainers securing the motor hub in the
motor housing.

NOTE: Take care not to scratch the fan
housing when installing the blade
assemblies.

9. Insert a 1/4-20 x 11mm pan head screw

with lockwashers into each of the two
recessed holes in one of the blade
flanges.

10. Align two of the threaded holes in the

motor hub with the two slots in the
switch housing plate (Figure 7).
Position the blade flange on the motor
hub so that the screws in the blade
flange align with the two threaded
holes in the motor hub. Tighten the two
screws securely. Repeat this proce-
dure for the remaining four blade
assemblies.

10-24 x 9mm TRUSS
HEAD SCREW (3)

FIBER WASHER (3)

FAN BLADE

BLADE
FLANGE

Figure 6

SWITCH
HOUSING
PLATE

SLOT FOR FLANGE
SCREW ACCESS

BLADE
FLANGE

1/4-20 x 11mm PAN HEAD
SCREWS WITH LOCKWASHER (2)

MOTOR HUB

Figure 7

INSTALL 8-32 x 7mm
PAN HEAD SCREW

TIGHTEN TWO 8-32 x 7mm
PAN HEAD SCREWS

SWITCH HOUSING/
LIGHT FITTER
ASSEMBLY

Figure 9

SWITCH HOUSING/LIGHT
FITTER ASSEMBLY

8-32 x 7mm PAN HEAD
SCREW (2)

MOTOR
CONNECTOR

SWITCH HOUSING
CONNECTOR

SWITCH
HOUSING
PLATE

Figure 8

7

BP7280, Olympia, KF100 7/31/06 10:57 AM Page 7

This manual is related to the following products: