Lens replacement – Elation Professional Design LED 36 Pro User Manual
Page 26
DESIGN LED 36 Pro™
©Elation Professional, Los Angeles Ca.
25
www.ElationLighting.com
11. LENS REPLACEMENT
The Design LED 36 Pro comes with a removable front cover that allows the lens assembly to
be changed out to achieve different beam angles.
The lens cover is held in place by four 5mm Allen screws. To access the lens kit, remove the
bard door assembly (if so attached) to access the four 5mm Allen screws, then loosen the
screws. The screws are held in by clips so they cannot be removed completely. Lift the outer
cover to access the lens kit. The lens kit is held in by four Phillips screws, remove these
screws to remove the lens kit. Replace the lens kit with the preferred option and reassemble
in reverse order. Be sure to align the rubber seal properly when reassembling.
- Work Light (56 pages)
- LED 36MH (3 pages)
- PRO FS (1 page)
- PAR56 (8 pages)
- DLED 36 Brick (3 pages)
- 5R (60 pages)
- Eled Light (6 pages)
- Design Par 575D (3 pages)
- 575B (56 pages)
- Professional Model Impression Mounting Light (36 pages)
- ELAR IPX (2 pages)
- Design Spot 1200c (3 pages)
- 15R (29 pages)
- Opti Tri 30 (3 pages)
- RGB Lamp (36 pages)
- 1400E (64 pages)
- Event MHTM (60 pages)
- High Output LED Color Changer Opti RGB (3 pages)
- LED 12 Brick II (32 pages)
- Event Panel System (3 pages)
- Outdoor LED Par Fixture ELAR EXPAR (2 pages)
- 72MKII (36 pages)
- Spot 300E (3 pages)
- LED White Light Fresnel ELED Fresnel (2 pages)
- Design Spot 250 Pro (56 pages)
- Pro FS 575 (2 pages)
- Flower 5/90 (2 pages)
- Pro FS 1000 (2 pages)
- Spot 250 (3 pages)
- ELAR EXFLOOD Flood Light (2 pages)
- 60TM (48 pages)
- Evled Media Screen Series (6 pages)
- ELED STRIP RGBW (10 pages)
- Design 60 Tri (44 pages)
- CMY Zoom 250 (40 pages)
- Spot 1400E (4 pages)
- Power Spot 700 CMY II (3 pages)
- 108IP (3 pages)
- 72IP MKII (3 pages)
- Design Spot 300 PRO (64 pages)
- 12 Brick (3 pages)
- Aquarius II (4 pages)