Electrolux 60160 TK - Manual (Page 10)

Installation
10
Plug Socket
The plug socket necessary for connection of your appliance to the
electricity supply should be positioned so that it is possible to pull out
the appliance plug.
If your appliance is installed under a
continuous worktop, the plug socket
should be provided as shown.
Alternatively a concealed spur socket
fitted with a 13 A fuse may be fitted.
If the socket is not accessible once the
appliance is built in, the electrical
installation must include suitable
means of isolating the appliance
from the mains (e.g. fuse, cut-out,
current trip or similar with a mini-
mum contact separation of 3 mm).
The mains cable may only be changed by a qualified electrician or
competent person. If your appliance needs repairing, please contact
your
local Service Force Centre.
130
300
AEG44
Electrical Connection
Any electrical work required to install this appliance should be carried
out by a qualified electrician or competent person.
WARNING – THIS APPLIANCE MUST BE EARTHED
The manufacturer declines any liability should these safety mea-
sures not be observed.
Before switching on, make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate. The rating plate
is inside, on the left.
The appliance is supplied with a 13 amp plug fitted. In the event of
having to change the fuse in the plug sup-
plied, a 13 amp ASTA approved (BS 1362) fuse
must be used.
Important
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow Earth
Blue
Neutral
Brown Live
207
GREEN & YELLOW
13 AMP. FUSE
BROWN
CORD CLAMP
BLUE
13 AMP