Emerson Radio AV400 - Manual (Page 12)

11
Connection of all speakers are the same.
Notes
• Do not remove
excessive amount of
insulation on the wire
cords, to avoid the
stripped portion from
touching each other. The
optimal length for the
stripped part should be
around 1/3 inch (or
1cm).
• Do not push the
stripped part too far
into the speaker
connectors.
Insert the wire to the jack behind of the Speaker.
The above connections can be expressed by the below table:
FRONT LEFT FRONT RIGHT CENTER
SURROUND
RIGHT (REAR)
SURROUND
LEFT (REAR)
SPEAKERS
Use Wires
Note: always connect colored wire to colored speaker terminal (+).
always connect black wire to black speaker terminal (-).
Unit
Terminals
L+
White
L -
Black
R+
Red
R -
Black
C+
Green
C -
Black
SL+
Blue
SL -
Black
SR+
Grey
SR -
Black
PASSIVE
SUBWOOFER
+ -
Black Purple