Led solar wall light, Intended use, Parts description – Livarno 108340-14-01/108340-14-02/108340-14-03 User Manual
Page 7: Technical data, Scope of delivery
7
GB
LED Solar wall light
Intended use
The LED solar-powered wall light is intended to
illuminate outdoor areas without electrical con-
nection, e.g. garden sheds etc. The LED solar-pow-
ered wall light is not suitable for commercial use.
Parts description
1
Rawlplug
2
Mounting plate
3
Screws (4 x 30 mm)
4
Hanger
5
Receiver
6
Solar cell
7
Sensor
8
Battery cover
9
Battery compartment
10
Rechargeable batteries
11
ON / OFF switch
Technical Data
Operating voltage: 3.6 V
Rechargeable
batteries:
3 x 1.2 V NiMH batteries,
900 mAh, AAA
Light bulb:
4 LEDs, approx. 0.5 W
(LEDs not replaceable.)
Solar cell:
approx. 5.5 V, approx.
100 mA
Sensor:
Range: max. 5 m, detection
angle: approx. 100° hori-
zontal, approx. 90° vertical
Protection class:
IP43 (spray-proof)
Scope of delivery
Check immediately after unpacking that the
parts are complete and that the product is in
proper condition.
1 Main unit
3 NiMH-rechargeable batteries type AAA,
1.2 V
, 900 mAh – (preinstalled)
1 Mounting plate