Livarno Z31282-BS - Manual (Page 14)

14 GB/IE/CY
Use
Insert the connector of main
lead to the lamp strip (see. Fig.
D + H.).
Plug the mains plug 2 into the
socket (see Fig. I).
Use the ON- / OFF-switch 6
(supply lead) and the press
switch
5 (light strip) to switch
on the light strip 1 (see Fig. H).
To switch off, pull the mains
plug out of the mains socket or
press the push-button switch
(light strip).
Note: Please be aware that
switching off the light by means
of the push-button switch (light
strip) is intended only for short
periods of time. If you are intend-
ing to switch off the light for a
longer period of time, then you
should instead use the ON / OFF
switch (mains lead). Otherwise
the device continues to draw
current.
Cleaning and care
CAUTION! RISK OF
ELECTRIC SHOCK!
First remove the the mains
adapter from the socket.
Do not use any solvents, petrol
or similar items. This would dam-
age the device.