Epson WorkForce 40 Series - Manual (Page 19)

Replacing Ink Cartridges 19
Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin. You must install new
cartridges immediately after removing the old ones.
Caution:
Do not open ink cartridge packages until you are ready to install the ink. Cartridges are
vacuum packed to maintain reliability.
1. Turn on the printer.
If a cartridge is expended, the ink light on the control panel stays on. You
must replace the cartridge to be able to print.
If the ink light is flashing, a cartridge is low on ink; replacement is
recommended.
Note:
You can also replace an ink cartridge before the
ink light is on or flashing by
following the steps below.
2. Open the printer cover.
3. Press the ink button.