Epson 670 - Manual (Page 13)

R4C474Setup Guide
Rev_C
A5 size SETUP.FM
3/24/00 Pass 0
R Proof Sign-off:
Gazan, CRE Tsukada_______
N.Nomoto
_______
_______
Checking the print head nozzles
Make sure that the printer is turned off. Hold down the
E load/eject button
(➀ in the illustration below) and press the P power button (➁ in the
illustration below) to turn on the printer. Then release both buttons.
Here are sample printouts.
If the nozzle check page does not print satisfactorily (for example, if any
segment of the printed lines is missing), then you should clean the print
head as explained below. If the printout is satisfactory, you are ready to
print your first page. See “Printing Your First Page” for instructions.
Cleaning the print head
Follow the steps below to clean the print head.
1.
Make sure that the P power light is on and that both the B black and
A color ink out lights are off.
2. Hold down the
T
cleaning button for three seconds.
segments are missing
Good Sample Print head Needs to be deaned.