Epson 670 - Manual (Page 11)

R4C474Setup Guide
Rev_C
A5 size SETUP.FM
3/24/00 Pass 0
R Proof Sign-off:
Gazan, CRE Tsukada_______
N.Nomoto
_______
_______
Note:
Install both ink cartridges. If either of the cartridges is not installed, the printer
will not work.
6. Press the ink cartridge clamps down until they lock in place.
c
Caution:
Once you install the ink cartridges, do not open their clamps again until
you replace the ink cartridges; otherwise, the cartridges may become
unusable.
7. Press the
R
cleaning button. The printer moves the print head and
begins charging the ink delivery system. This process takes about one
and a half minutes.
c
Caution:
Always press the
R
cleaning button to move the print head. Do not
move the print head by hand. Doing so may damage the printer.
While the ink is charging, the P power light flashes and the printer
produces a variety of mechanical sounds. These sounds are normal.
When the ink delivery system has been charged, the print head returns
to its home (far right) position and the
P power light comes on.
c
Caution:
Never turn off the printer while the
P power light is flashing.
8. Close the printer cover.