Fig.11 fig.12, Fig.13, Fig.14 – Sealey SS60 User Manual
Page 5
8.1
Broadcast Lance
8.1.1 Move the broadcast lance into the broadcast position (fig.11).
8.1.2 Ensure the broadcast lance valve is in the OFF position
(fig.11).
fig.11
fig.12
8.2
Broadcast Nozzle
8.2.1 If needed, rotate the broadcast nozzle so that the spray
pattern is pointed down and evenly distributed. (fig.12)
8.2.2 Ensure gloves are worn when adjusting the lance and
nozzle, as dripping may occur.
8. USE - BROADCAST SPRAYER
8.3
Start Spraying
8.3.1 Turn the remote switch to ON (I).
8.3.2 Turn the broadcast lance valve on (fig.13).
fig.13
8.3.3 To ensure a uniform spray pattern, overlap each spray
300mm (fig.14).
8.3.4 See the speed/application tables to determine the speed for
the ATV.
fig.14
NOTE! It is possible to use the broadcast lance and spot spray
gun simultaneously.
8.4
Leaving Unattended
8.4.1
If the sprayer must be left unattended; A) disconnect the
power. B) relieve the system pressure by pressing the gun
trigger. C) turn off the vehicle and chock the wheels.
8.5
Sprayer Becomes Inoperable
8.5.1
If the sprayer becomes clogged or stops working do not
attempt to repair whist agents are still in the sprayer tank.
8.5.2
Review the troubleshooting table to proceed.
Original Language Version
SS60, SS98 Issue:2(P) -18/07/13