Emerson Radio ES128 - Manual (Page 23)

22
Programmed Playback
This feature allows you to program up to 20 tracks on a disc to play in any desired
order.
NOTE: You cannot program the CD player while a disc is playing. You must
press the STOP button to stop the disc before performing the program
steps below.
1.) Load the disc as usual and wait until the display
shows the total number of tracks.
2.) Press the PROGRAM/MEM./CLK. ADJ button on the front panel or the PROG.
button on the remote control. The MEMORY indicator begins flashing in the
display.
The Program Memory Number “P01” appears briefly then the track number
“00” flashes.
3.) Press the or buttons to select the first track number you wish to program.
Example: Track 03.
4.) When the desired track number is flashing in the display press the
PROGRAM/MEM./CLK. ADJ button again to enter that track in Program
Memory Number “P01”. The track number display returns to “00”.
5.) Select the next track to be programmed and when the desired track number is
flashing in the display press the PROGRAM/MEM./CLK. ADJ button to store
that track number in Program Memory Number “P02”.
ES128_042806.p65 28/4/2006, 11:39 22