Electrolux 50620 - Manual (Page 23)

Operating Instructions
23
Wash Complete/Removing the Washing
The washing program normally ends with the final spin.
After Soaking:
0
Release the SOAKING button (the COTTONS/LINEN or EASY-CARES main
wash starts).
After a Rinse Hold:
After a rinse hold the water must be pumped out, or the washing spun:
0
1. Release the RINSE HOLD button.
2. Either turn the program selector clockwise to SPIN or SHORT SPIN
(the washing is spun according to the selected program and the spin
speed set)
or
turn the program selector clockwise to PUMP OUT (the water is
pumped out).
After the program is completed:
3
For safety reasons, the door remains locked for 1-2 minutes after the
end of the program.
0
1. Open the door.
2. Remove the washing.
3. Press the ON/OFF button.
The indicator extinguishes, the washing machine is switched off.
4. Close the water tap.
5. Pull out the detergent compartment a little, so that it can dry out.
Leave the main door slightly open so that the washing machine can
ventilate.
Important! If the washing machine is not to be used for a long period:
close the tap and isolate the washing machine from the mains.