Electrolux 50620 - Manual (Page 22)

Operating Instructions
22
Starting the Washing Program
0
1. Check whether the water tap is opened.
2. Switch on the washing machine:
Press the ON/OFF button.
The ON/OFF indicator illuminates, the
washing program starts.
Changing the Spin Speed or Selecting Rinse Hold
0
If desired, reduce the spin speed for the final spin
or select rinse hold:
– Press the spin speedbutton or
– Press the RINSE HOLD button.
If RINSE HOLD is selected, the washing is left in
the last rinse water, it is not spun.
3
If you do not reduce the spin speed, the final spin for all washing
programs is automatically performed at 1000 revolutions per minute.
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.
During the Washing Program
Program progress indicator
The program selector serves as a program progress indicator by rotating
in a clockwise direction to the end of the program. It is normal for the
rotation speed of the program selector to vary during the program.
Changing settings:
During the washing program you can:
– Change the spin speed
– Select RINSE HOLD
– Change the temperature setting
Other settings cannot be altered.
Stopping the program early:
0
1. Press the ON/OFF button.
2. Turn the program selector clockwise to PUMP OUT, SPIN or SHORT SPIN.
3. Press the ON/OFF button again.
The water is
– pumped out or
– pumped out and the washing then spun.