Zoofari Pet Grooming Set ZTPS 6 A1 - Manual (Page 11)

Zoofari ZTPS 6 A1
English - 9

Your pet's coat should be thoroughly cleaned before cutting it. You thus prevent the blades
from becoming worn too rapidly due to existing dirt.

The coat to be cut must be clean and dry. Brush through the coat to remove any knots.

First, remove the blade protective cover (2) from the shaving head.

Now attach the desired attachment comb (3, 4, 5, 6) to the shaving head with the teeth
facing upward and press the tab of the attachment comb (3, 4, 5, 6) firmly on the lower
metal side of the shaving head until it engages. Ensure that the attachment comb (3, 4, 5, 6)
has engaged correctly before you start cutting your pet's coat.
If you are not sure which attachment comb (3, 4, 5, 6) you should use, first start with a
large comb and then switch to a smaller comb if necessary.

Insert the mains plug into a socket and move the on/off switch on the side of the pet hair
clippers (1) to the "ON" position to switch on the pet hair clippers (1).
Always switch on the pet hair clippers (1) first before you approach your pet's fur with
the device. This prevents potential blocking of the blades.

To familiarise your pet with the sound of the pet hair clippers (1), approach your pet slowly
with the device when it is switched on.

Cut in the natural direction of growth of your pet's coat. If you cut against the direction of
growth, your pet's hair stands up and is cut shorter as a result.

As a rough indicator for cutting, you should start behind the shoulders and slowly work
backwards and down. Work particularly carefully when you cut/trim sensitive parts of the
body such as face, stomach, legs or hindquarters of your pet.

Start cutting/trimming slowly and carefully.
It is normal that the shaving head heats up while cutting. Switch off the pet hair clippers
(1) at intervals and check whether the cutter may have become too hot for your pet. In
this case, let the pet hair clippers (1) cool down briefly.
When you have finished cutting/trimming or if you want to change an attachment comb (3, 4, 5,
6), move the on/off switch on the side of the pet hair clippers (1) to the "OFF" position to switch off
the pet hair clippers (1) and remove the mains plug from the socket.
Cleaning and care
DANGER! Remove the mains plug from the socket each time you want to clean the pet
grooming set.
DANGER! Never immerse the device in water or other liquids.