beautypg.com

B. main display, 3 microcem pocket pc display (main display shown), 1 status values – Emerson MicroCEM User Manual

Page 55: B. main display -3, Figure 3-3, Microcem pocket pc display (main display shown) -3, Table 3-1, Status values -3, Model microcem

background image

Instruction Manual

748467-A

January 2002

Rosemount Analytical Inc. A Division of Emerson Process Management Operation 3-3

Model MicroCEM

b. Main Display

The MicroCEM Main Display (Figure
3-3) p
rovides the status of the three
emissions channels. The status in-
cludes the current reading (updated
approximately every 2 seconds), the

last 1-minute average, and the last 15-
minute average. The status column
(Sts) indicates the status of the meas-
urement and can be any of the values
in listed in Table 3-1. (“Status” shown in
order of precedence. Maintenance
mode status takes highest prece-
dence.)

Figure 3-3. MicroCEM Pocket PC Display (Main Display Shown)

STATUS

DESCRIPTION

M

Indicates that maintenance mode is active.

C

Calibration in process

I

Invalid Reading. Indicates that the reading is invalid due to calibration failure or sensor failure.

V

Valid Reading

P

Customer Process Off Line (Dry contact by customer)

O

MicroCEM System Off

Table 3-1. Status Values

Tools Menu

Provides access to all

functionality.

Note: Exit is only be available

when current user has

administrative access.

Drag the edge of the

column to resize.

Use the scrollbar to

see full set of data.

Toolbar Buttons

About

Data Logs

MicroCEM Admin

MicroCEM Settings

Alarms

S. = Status

See Table 3-1.