Emerson Radio HD8116 - Manual (Page 18)

17
Programmed Playback
You can program up to 20 tracks on a disc to play in any desired order.
Note: You can program a disc either during Playback or in Stop mode.
1.) Press the PROG. button once. The Program Number
“01” appears. The PGM indicator and the the track
number “00” flash.
2.) Press the or button to select the first track to be
programmed.
Example: Track “07”.
3.) When the desired track number is flashing in the display, press the PROG.
button again to enter the desired track number in Program Number “01”.
The track number returns to “00” and the Program
Number advances to “02”.
4.) Repeat Steps 2 and 3 to program additional tracks up to a maximum of 20.
5.) Press the PLAY/PAUSE button to begin programmed
playback. The PGM indicator remains in the display.
• Playback begins with the first track you programmed and
continues until all programmed tracks have been played,
and then the player stops.
The programmed sequence will remain in the memory until the power shuts
‘Off’ (approximately 30 seconds) or until the CD door is opened.
• If you press the PROG. and PLAY/PAUSE buttons again before the power
shuts off, the programmed sequence will play again.
HD8116_B100305.p65 4/10/2005, 15:28 17