Model ei2110, Technical specification – Ei Electronics Ei2110 User Manual
Page 2
Model
Ei2110
E & OE. As our policy is one of continuous product development, we reserve the right to alter product details without prior notice
.
Ei2110 RevB
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Phone.
+353 (0)61 471277
Fax.
+353 (0)61 471053
E-mail.
Web.
www.eielectronics.com
Technical Specification
Supply Voltage:
230V AC Mains Power Supply.
Battery back-up:
Built-in 10 Year tamperproof
rechargeable Lithium cells.
Power-On Indicator:
Continuous Green LED when
mains connected.
Alarm sounder:
Electronic Piezoelectric horn
Alarm Indicator:
Red LED will flash twice per
second.
Memory Indicator:
Red LED will flash twice every
40 seconds to indicate the
device has been in alarm state in
the last 24 hrs.
Fault Indicator:
Amber LED flashes once every
40 seconds to indicate excessive
smoke chamber contamination.
Amber LED flashes once every
40 seconds with an audible beep
to indicate a sensor fault.
Low battery:
Red LED will flash
once every 40
seconds simultaneously with a
horn beep
Temperature Range:
0°C to 40°C
Humidity Range:
0% to 90% Relative Humidity
Interconnect:
A combination up to 12 devices
can be interconnected. These
devices include Ei2110 Multi-
Sensor Fire alarms, Ei160 RC
Series Smoke & Heat alarms
Ei261 series CO alarms*.
In addition the following
accessories may be
interconnected e.g.
Ei168RC
RadioLINK base, Ei1529RC
control switch and EI128R
relay base.
*Note: we recommend that a
control switch be fitted when
interconnecting CO alarms with
Smoke and fire alarms.
Optional Controls:
Ei1529RC Control Switch
MCP401RC Manual Call Point
Fixing:
Easi-fit mounting base
Plastic material:
UL94VO flame retardant
Dimensions:
152mm diameter x 50mm
depth
Weight:
320g
Warranty:
5 year (limited) warranty
Approvals:
Kitemarked to BS
EN14604:2005 and CE
certified.
Specifications are subject to change
RadioLINK Interconnect System
Hardwired Interconnect System