Electrolux RH42PC60GS - Manual (Page 18)

18
Care and cleaning
Care and cleaning
The frequency of cleaning depends on the amount
and type of cooking.
Do not use the ventilating system without the
Always unplug or disconnect the appliance from the
power supply before servicing.
attempting to clean any part of the appliance.
Filters
aluminum and are long lasting.
To Remove The Metal Grease Filters
Turn the fan and lights off.
Pull the spring release handle.
To Replace The Metal Grease Filters
Reverse procedure.
To Clean Filters
least once a month; they can be washed by hand
or in the dishwasher.
dry thoroughly before replacing it.
•
•
•
•
•
Lights
Before replacing the lamps, switch power off at
service panel and lock service panel disconnecting
means to prevent power from being switched on
accidentally.
Replace Lights
Remove the inner lamp lens cover by inserting a
slots and gently prying it free.
NOTE: Do not remove the outer trim ring (lamp
assembly).
Grasp the bulb and pull it straight out from the
lamp socket.
Follow package directions, wear gloves, do not
touch bulb with your bare fingers.
Replace inner cover by
inserting the three
retaining tabs into the
three slots and pressing
them firmly in place.
NOTE: Once you have replaced the light bulb,
make sure to put back the glass in its place.
•
•
Replace with 120 volt, 40 watt halogen bulbs with
a G9 base SUITABLE FOR USE IN OPEN
LUMINAIRES. •
• Bulb
NOTE: Turn off the lights and fan. Allow the
lights to cool before handling. Replace lights
per instructions. If new lights do not operate,
be sure lights are inserted correctly before
calling service.
The glass lens and inner trim ring are 2 pieces
loose fitting. Be careful when removing the trim
ring that the glass lens does not fall out.
Outer
ring
Inner
ring