Initial operation, Gb mt – Florabest FGPS 1100 B2 User Manual
Page 18

18
GB MT
• Attach the prefilter with reflow stopper
(15) to the connector prefilter (16) at the
pressure hose (13). Both piecese mar-
ked with a
B
.
• Remove the protective cap (
B
1) from
the garden pump water inlet (2).
• Attach the Adapter (11) to the water inlet
(2) . Both pieces marked with an
A
.
• Attach the connector water inlet (14) with
the seal ring (12) to the adaptor (11).
Both pieces marked with an
A
. Fit the
water inlet free from air.
• Remove the protective cap (
B
3) from
the garden pump water outlet (4).
• Fit a pressure hose to the water inlet (2)
Fit the water inlet free from air.
Air in the suction hose will stop the
garden pump from working prop-
erly.
Filling the pump
Fill up the garden pump every time before
you start using it. This will ensure an im-
mediate start. Running dry will destroy the
pump.
• Open the filling screw (
A
9) on the
garden pump.
• Fill with water to the fill point such that
water starts to run out of the filling
screw (
A
9) hole. Retighten the filling
screw (
A
9).
Operational start-up
• Check that the electrical connec-
tion is 230V ~50Hz
Initial Operation
Assembly
C
• Fix the carrying handle (
C
7) to the
garden pump using the fixing screws
(
C
8).
Mains Connection
The pump you have purchases is already
fitted with an earthed plug. The pump is in-
tended for connection to an earthed socket
at 230 V ~ 50 Hz.
Setting up
• Place the unit on a firm, horizontal,
non-flooding surface.
• To permanently install the garden
pump, screw it to the ground. Screw-
ing it to a fixing panel will prevent the
appliance from moving.
• Always put up the garden pump at a
point higher than the water surface
you wish to pump water from.
Where this is impossible, install a low
pressure-resistant shut-off implement
between the appliance and the suction
hose (Available from specialist retail-
ers).
• Connect the power cable (6) to the
power supply.
Connecting the hoses
On the suction side, attach a hose
with reflow stopper and install a
prefilter (Available from specialist
retailers). On the suction side, do
not use any quick-action connection
systems.
D
E