3 quick start, Quick start – Eaton Electrical V3 User Manual
Page 12
www.eaton.com
Network Shutdown Module V3 – User Manual - 34 003 934 XU / AE
Page 11/65
2.3 Quick Start
To install the Network Shutdown Module in 5 minutes, please perform the following steps on a machine
running Windows 2000 / XP / 2003 / 2008 / Vista / 7, Linux or Mac OSX:
z
Step 1 (Pre-requisites)
Check that following
>
the electrical connection between the UPS and the server to protect
>
the network connection between the UPS and the Network Management Card (or Proxy).
z
Step 2 (Optional)
To enable the configuration and supervision remote access, Network Shutdown Module needs
ports (UDP/TCP)
to be opened in the Firewall (Automatically opened in the Windows Firewall).
z
Step 3 (Software Installation)
On a Windows 2000 / XP / 2003 / 2008 / Vista / 7, Linux or Mac OSX machine, execute the “Network
Shutdown Module” package under an administrator account.
z
Step 4 (Configuration)
>
In the Configuration->Power devices screen,
Enter the default Login «admin» and default Password «admin»
Then click on the Add button and
>
Enter the IP (or the host name) of the Network Management Card (or Proxy)
or use the following new function:
New
: With the Quick Scan … button, available with version 3.10 and later, you can discover
in a few seconds the cards connected to the network and then select a card from the list.
>
Save your configuration
>
In the Configuration->Users window configure your
(recommended)
>
For the multi-UPS configurations, please refer to
z
Step 5 (Operation)
You can now supervise the UPS state and the information concerning the protected server