Crivit AS-1543 - Manual (Page 18)

18 GB
3 Years Warranty
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
We will be personally available to discuss the
situation with you.
Any repairs under the warranty, statutory gua-
rantees or through goodwill do not extend the
warranty period. This also applies to replaced
and repaired parts. Repairs after the warranty
are subject to a charge.
IAN: 78984
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: [email protected]
After replacing:
Do not use if the wheel slides sideways
after replacing! Make sure that all
screws are still secure and have not
loosened after the first few minutes
of riding. Tighten the wheel again to
make sure that it rides smoothly and
that no noises are coming from the
bearings.
Exchanging the ball bearings
(Fig. J)
• Remove wheels (17) as described
(page 17-18).
• Remove one bearing by pressing on the
spacer (18) with a setscrew wrench and
remove the spacer.
• Remove the other bearing (19), pushing it
out with a setscrew wrench.
• Insert a new bearing. Flip the wheel, insert
the spacer, and then push in a second new
bearing.
• Reattach the wheels.
Care, Storage
It is recommended that the product be tho-
roughly cleaned and dried after being used.
Remove small stones or other objects that may
have remained on your wheels. Dry off wet
or damp ball bearings with a clean cloth. Oil
the bearings from the outside with a suitable
bearing oil to prevent rusting. Always store the
product in a dry place.
Disposal Information
Dispose of the product and all corresponding
components through an approved waste dispo-
sal company or through your municipal waste
disposal provider. Please observe the currently
valid regulations. In case of doubt, ask your
waste disposal provider about environmentally
sound disposal.