Canfield – Kichler 300103 User Manual

Page 11

Text mode
Original mode

Canfield

Fig. 22

11. INSTALLING THE SWITCH HOUSING

NOTE: Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box. Turning power
off using the fan switch is not sufficient to
prevent electric shock.

1. While holding the switch housing under your
fan, snap together the wire connection plugs .

2. Carefully push all wires back into the switch
housing, then install the switch housing onto
the mounting plate with 3 screws provided. Be
sure to tighten all screws. (Fig. 22)

Switch
housing

Wire connector

Screws

Mounting plate

This manual is related to the following products:

300118 300105 300107