Edimax Technology ER-5398S - Manual (Page 13)

5. Partition LED is lit
l Check the connected devices. The hub will automatically partition a defective
Ethernet device which causing excessive errors.
6. Collision LED is constantly flashing
l Remove all the network cables; connect the cables back one by one to isolate the
source of the collision.
l Check the network cable, inferior cable quality will result in excessive collision
and error packets.
7. Jabbler LED is constantly flashing
l Check the connected devices. Remove all the network cables; connect the cables
back one by one to isolate the source of the jabber.
[!] Contact your dealer if problem persist.
10