beautypg.com

Electrolux EWF 6120 W User Manual

Page 5

background image

32 safety information

General safety

It is dangerous to alter the

specifications or attempt to modify

this product in any way.

During high temperature wash

programmes the door glass may get

hot. Do not touch it!

Make sure that small pets do not

climb into the drum. To avoid this,

please check into the drum before

using.

Any objects such as coins, safety

pins, nails, screws, stones or any

other hard, sharp material can cause

extensive damage and must not be

placed into the machine.

Only use the advised quantities of

fabric softener. Damage to the fabric

can ensue if you over-fill. Refer to the

manufacturer’s recommendations of

quantities.

Wash small items such as socks,

laces, washable belts etc in a

washing bag or pillow case as it is

possible for such items to slip down

between the tub and the inner drum.

Always unplug the appliance and

turn off the water supply after use,

clean and maintenance.

Under no circumstances should you

attempt to repair the machine

yourself. Repairs carried out by

inexperienced persons may cause

injury or serious malfunctioning.

Contact your local Service Centre.

Always insist on genuine spare parts.

Do not use your washing machine to

wash articles with whalebones,

material without hems or torn

material.

Installation

This appliance is heavy. Care should

be taken when moving it.

When unpacking the appliance,

check that it is not damaged. If in

doubt, do not use it and contact the

Service Centre.

All packing and transit bolts must be

removed before use. Serious

damage can occur to the product

and to property if this is not adhered

to. See relevant section in the user

manual.

Any plumbing work required to install

this appliance should be carried out

by a qualified plumber or competent

person.

Any electrical work required to install

this appliance should be carried out

by a qualified electrician or

competent person.

Care must be taken to ensure that

the appliance does not stand on the

electrical supply cable.

If the machine is situated on a

carpeted floor, please adjust the feet

in order to allow air to circulate freely

Always be sure, that there is no

water leakage from hoses and their

connections after the installation.

After having installed the appliance,

check that it is not pressing or

standing on its electrical supply

cable, inlet hose and drain hose.

If the appliance is installed in a

location subject to frost, please read

the “dangers of freezing”chapter.

126.2931.23…EWF6120W.qxd:- 10/03/09 15:42 Página 32