Electrolux EWF 6120 W - Manual (Page 10)

use 37
The selector dial can be turned either
clockwise or anticlockwise. Position O to
Reset programme/ Switching OFF of the
machine.
At the end of the programme the
selector dial must be turned to
position O, to switch the machine
off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the lights of the
programme progress display start to
flash. The machine will not perform the
new selected programme.
Select the required temperature
Turn the temperature selector dial to
select the washing temperature.
Maximum temperatures are 95°C for
cottons, 60°-50°C for synthetic fabrics,
40°C for delicate fabrics, wool and
fabrics to be hand-washed.
By selecting position (Cold) the machine
will wash with cold water. To be used for
extremely delicate items, such as
curtains
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select the spin speed or Night
Cycle
or Rinse Hold option
Turn the spin speed selector on desired
position. You could also choose the
position “No spin”, “Rinse Hold” or
“Night Cycle”.
At the end of the program, the selector
dial must be turned to position O, to
switch the machine off.
In the all levels of spin, the sound is
reduced and your appliance could be
used at night without any
inconvenience, to take advantage of off-
peak rates. For Cotton program and
Synthetics, rinses were carried out with
more water.
126.2931.23…EWF6120W.qxd:- 10/03/09 15:42 Página 37