Electrolux EDB705 - Manual (Page 37)

TO REMOVE COVER OF MAINS
TERMINAL
From the rear of the appliance, remove mains
input terminal cover to gain access to terminal
block.
First remove retaining screw with pozidrive
screwdriver. See Fig. 9.
Prise cover loose using screwdriver in
position (1) then lever off with screwdriver in
position (2) at either side. See Fig. 10.
Lift cover and remove screw from cable
clamp. See Fig. 11.
37
MAKING THE ELECTRICAL CONNECTIONS
Fig.11
Fig.10
Fig.9