Electrolux MCD1761E - Manual (Page 9)

Setting the clock
7
Before operation
1. Choose the clock function.
(12 hour clock).
Choose the 24 hour
clock.
3. Press the COOKING
MODE button to
change from hours to
minutes.
4. Set the minutes. Rotate the
TIMER/WEIGHT/POWER
knob until the correct
minute is displayed (35).
5. Press the COOKING
MODE button to start
the clock.
2. Set the hours. Rotate the TIMER/WEIGHT/
POWER knob until the correct hour is
displayed (23).
x1 and hold for 3 seconds
x1
x1
x1
Example: To set the 24 hour clock to 23:35.
There are two setting modes: 12 hour clock and 24 hour clock.
1. To set the 12 hour clock, hold the COOKING MODE button down for 3 seconds.
will appear in the display.
2. To set the 24 hour clock, press the COOKING MODE button once more after
Step 1, in the example below will appear in the display.
x1 and hold for
3 secs.
To set the clock, follow the example below.
NOTES:
1. You can rotate the TIMER/WEIGHT/POWER knob
clockwise or counter-clockwise.
2. Press the STOP button if you make a mistake during
programming.
3. If the electrical power supply to your microwave oven
is interrupted, the display will intermittently show
after the power is reinstated. If this
occurs during cooking, the programme will be
erased. The time of day will also be erased.
4. When you want to reset the time of day, follow the
above example again.
Plug in the oven.
1. The oven display will flash:
2. Press the STOP button, the display will show:
3. To set the clock, see below.
4. Heat the oven without food. (See page 15, note 2).
Using the STOP button
Use the STOP button to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
x1
2. AG-61+62D-UK English 20/05/2004 15:30 Page 7