Epoq Steamer User Manual

Page 18

6.4.1 Connecting to wired audio input

When the included audio cable is connected to an audio player and the
Streamer, the Streamer starts streaming after the audio button is pressed
shortly. The light around the audio button turns on constant light
(see section 7)

Use the included audio cable to connect the Streamer to the audio source.

Since the Streamer can handle multiple audio sources, the following
describes how the Streamer will react to various operations:

• If Bluetooth audio streaming is active when the jack is inserted and

the audio button is pressed again, the Bluetooth audio is stopped and
the wired audio is streamed instead (priority control). When the jack is
removed Bluetooth audio does NOT automatically resume, but must be
activated by pressing the audio button shortly again.

• If a phone call is active when the jack is inserted, the call is NOT

terminated.

• When the jack is removed during audio streaming, the Streamer stops

audio streaming and the hearing instruments return to standard
program.

• If the audio button is pressed without a jack connected, streaming will

not start.