Emerson EWR20V4 - Manual (Page 38)

38
Settings for an external source (cont’d)
Recording
Before recording from an external source, see the instruction for the connection on page 37.
VCR VCR DVD-RW DVD-RW
VR
DVD-RW DVD-RW
Video
DVD-R DVD-R
Recording from an external source
1. Turn the TV and the unit on, and be sure to select the input
of the TV to which the unit is connected.
2. When you want to record to the disc: Press:
Press OPEN/CLOSE A button to open the disc tray, then
place the disc to record properly.
When you want to record to the tape: Press:
Insert the tape with a safety tab into the cassette compart-
ment.
3. Select the input of the unit which the external equipment is
connected. (L2 or L1)
•To use the input jacks on the back of this unit, select “L1” position by
pressing [0],[0],[1] on the remote control or the CH K / L buttons.
•To use the input jacks on the front of this unit, select “L2” position
by pressing [0],[0],[2] on the remote control or the CH K / L but-
tons.
4. Select a recording speed using REC SPEED button. Refer to
“Recording speed” on page 26 for DVD or page 94 for VCR.
5. Press REC/OTR button on the unit to start recording.
6. Press PLAY button on the external source to record from.
7. For disc:
Press STOP C button on the unit to stop recording.
For tape:
Press STOP/EJECT C A button on the unit to stop record-
ing.
This operation may take a while to be completed.
SP SLP
VCR mode
XP SP LP
EP SLP
DVD mode
SEP
VCR
This operation may take a while to be recognized.
DVD
POWER REC SPEED AUDIO
ZOOM SKIP SKIP
OPEN/CLOSE
TOP MENU
SPACE
VCR
SETUP
CM SKIP
TIMER PROG.
RETURN
1 2 3
4 5 6
7 8
0
9
STOP
PLAY
CH
VIDEO/TV
SLOW
PAUSE
.@/: ABC DEF
GHI JKL MNO
PQRS
REC/OTR
REC MONITOR
MENU/LIST
CLEAR/C-RESET
SEARCH
MODE
ENTER
DISPLAY
TUV WXYZ
DVD
5
1 2
3
7
4