beautypg.com

Resetting all audio levels, Chapter 3 • remote control, Resetting all audio levels -12 – Extron Electronics SW6 VGA A User Manual

Page 12: Chapter three • remote control, Chapter three

background image

SW6 VGA Audio • Installation and Operation

Installation and Operartion, cont’d

2-12

SW6 VGA Audio Switcher

Resetting all audio levels

To reset the audio level to 0 dB for all inputs, press and hold the

Audio Configuration/Save button. The Audio Configuration/

Save LED begins to blink after approximately 1 second.

Continue to hold the button for approximately 10 seconds until

the LED turns off. All input audio levels are reset to 0 dB.

3

Chapter Three

Remote Control

Simple.Instruction.Set.Control

Windows

®

-Based.Program.Control

Contact.Closure.Control

IR.102.Infrared.Remote.Control

This manual is related to the following products: