Ericsson T10s - Manual (Page 10)

Turning Your Phone On and Off 9
Turning Your Phone On
and Off
Turning Your Phone On
• Press and hold the N O (ON/OFF) key until you hear a click.
If “Enter PIN” Appears in Display
Some SIM cards are protected with a PIN code. If Enter PIN appears in the dis-
play after you have turned on the phone, do this:
1. Enter your PIN. If you make a mistake while entering your PIN, erase the
wrong digit by pressing the C L R key.
2. Press Y E S .
Note! If your PIN is entered incorrectly three times in a row, the SIM card is
blocked. You can unblock it by using your PUK, see “Security for Your Phone
and Subscription” on page 46.
Network Search
After you have turned on the phone (and entered your PIN), the Ericsson logo
appears in the display and the phone searches for a network.
When a network is found, the phone beeps three times. The indicator light on
the top of the phone flashes green once every second and your network opera-
tor’s name (in most cases abbreviated) appears in the display.
This is called standby mode. You can now make and receive calls.
Initial Settings
The first time you turn on your phone, you may want to change the language
in the display, choose the ring signal type and set the clock. For more informa-
tion about these settings, see “Personalizing Your Phone” on page 31.
Display Language
Most modern SIM cards automatically set the display language to the lan-
guage of the country where you bought your SIM card. If this is not the case,
the default language is English. To change the display language, see “Display
Language” on page 34.
Enter
PIN
Enter
PIN
****
NETWORK
00:00