Elmo CRA-1 - Manual (Page 16)

■ If tablet communication cannot be performed (Status LED flashes)
Perform the wireless settings using the "Wireless settings buttons" on the base of the
tablet and the wireless adapter.
Turn ON the tablet's power, and
press the "Wireless settings button"
on the rear side.
↓
The "Status LED" flashes at high
speed.
↓
Press the "Wireless settings button"
on the wireless adapter.
↓
The "Status LED" on the tablet turns
off for a few seconds.
Wireless adapter Tablet rear side
When the "Status LED" turns off, the
tablet and wireless adapter can
communicate, and the tablet can be
used.
Caution
Perform the wireless setting within 30 seconds of pressing the "Wireless
settings button" on the rear side of the tablet.
16