Elmo CRA-1 - Manual (Page 15)

Tablet preparations
(1)
Connect the wireless adapter to the computer's USB port.
(2)
Turn on the tablet.
(1) When you press the power button, the power
LED is lit.
* If the power LED flashes or stays off, there
is not enough charge in the lithium-ion
battery. Charge the lithium-ion battery.
(2) If the "Status LED" on the tablet flashes
repeatedly and communication is not possible,
see <
If tablet communication cannot be
performed >.
Caution
If this product is used as described below, the communication range between
the tablet and wireless adapter may be shortened, or communication may
become unstable.
- There is an obstruction between the tablet and wireless adapter
- The product is used while placed on top of a computer
- A wireless device or electronic equipment is being used nearby
- The tablet is moved while being used
Also, due to the inherent characteristics of wireless communication, the
communication may become unstable in some positional relationships between
the tablet and wireless adapter.
15