Epson CX6400 - Manual (Page 14)

14 Copying
Copying
Follow the instructions in this chapter to use your CX6400 as a stand-alone copy
machine. See these sections:
■ “Copying Without a Computer” (below)
■ “Changing Copy Settings” on page 15
Copying Without a Computer
1. Open the scanner lid.
2. Place your document face-down on the glass, in the upper-left corner. Move
your document about 1/8 inch from the top and side edge so your entire
document is scanned.
Note:
If you place your document against the guides, the edges next to the guides won’t
be copied.
If you need to copy a thick document, such as a book, you can remove the scanner
lid to scan. Gently press down the original to keep it flat on the document table. Be
sure to replace the scanner lid when you’re finished.
Move the document in
about 1/8 inch from the
edges to avoid cropping